We are pleased to offer our customers the full range of Micro Epsilon Infra Red Products. These range from entry level handheld guns to fully installed sensors with trending and alarm condition notifications.
These products can be suited to every application even in the most demanding conditions with numerous mounting adapters, air wash screens etc.
For further information on any of the products below or data sheet please contact us or email info@amsolve.co.uk
OPTRIS MS SERIES -

The optris MS series combines state-of-the-art
technology with an attractive price.
A wide temperature range of -32 to 760
°C, laser aiming and an optical resolution of 20:1 allow technicians to carry
out accurate non-contact surface measurements for electrical and mechanical
maintenance, HVAC checks, automotive testing and other applications anywhere
that temperature is a factor.
optris MiniSightPlus: 'OFFSET' and 'HOLD' make
measurements smart. Object emissivities can be adjusted even after the
measurement is taken.
- Fast 0.3 second scanningl
- Lightweight at only 150 grams
- Laser sighting with narrow beam for accurate readings
OPTRIS LS SERIES -

This thermometer can be used in characteristic applications like preventive maintenance, quality management, research and development and electronic design.
The crosshair laser sighting indicates the spot size at any distance with absolute accuracy.
-
Spot size as small as 1mm
-
Crosshairs Laser sightings marks the actual spot size at any distance
-
Temperature range -35C to +900C
-
Optical Resolution 75:1
-
Thermocouple Input
OPTRIS CT - Non contact temperature measurement -40C to + 900C

One of the smallest infrared sensors world-wide with 22:1 optical resolution Rugged and usable up to 180°C ambient temperature without cooling Separate electronics with easily accessible programming keys and LCD backlit display Optional analogue output: 0/4-20 mA, 0-10 V, thermocouple type K or J Optional USB, RS485, RS232 interface or two relay outputs (optically isolated) Installation of up to 32 sensing heads in a network (with RS485)
OPTRIS CS - Low cost infra red thermometer -20C to + 350C

Size: M12x1, 87 mm long, stainless steel housing Temperature range: -20 to 350°C. Usable up to 75°C ambient temperature without cooling Scalable analog output: 0 - 10 V or 0 - 5 V Short circuit and polarity reversal protection Optional USB programming interface and software Wide power range: 5 - 7, 12 - 28 V DC
-
Rugged coated silicon optics
-
Integrated Electronics with LED alarm indication and smart sighting support
-
Adjustable signal processing
OPTRIS CS-Micro - Low Cost Micro Size Infra Red Thermometer
Size: M12x1, 28 mm long, stainless steel housing. Temperature range: -20 to 350°C Operates in ambient temperature up to 120°C without cooling (sensing head) Scalable analog output: 0 - 10 V or 0 - 5 V and additional simultaneous alarm output Short circuit and reverse polarity protection Optional USB programming interface and software Wide power range: 5 - 7, 12 - 28 V DC
For further information on any of the products below or data sheets please contact us or email info@amsolve.co.uk
