We are pleased to offer our customers the full range of Micro Epsilon Infra Red Products. These range from entry level handheld guns to fully installed sensors with trending and alarm condition notifications.

These products can be suited to every application even in the most demanding conditions with numerous mounting adapters, air wash screens etc.

For further information on any of the products below or data sheet please contact us or email info@amsolve.co.uk

OPTRIS MS SERIES:

optris_ms[1]

The optris MS series combines state-of-the-art technology with an attractive price.
A wide temperature range of -32 to 760 °C, laser aiming and an optical resolution of 20:1 allow technicians to carry out accurate non-contact surface measurements for electrical and mechanical maintenance, HVAC checks, automotive testing and other applications anywhere that temperature is a factor.
Optris MiniSightPlus: ‘OFFSET’ and ‘HOLD’ make measurements smart. Object emissivities can be adjusted even after the measurement is taken.

 

 

  • Fast 0.3 second scanningl
  • Lightweight at only 150 grams
  • Laser sighting with narrow beam for accurate readings

OPTRIS LS SERIES:

optris_ls[1]

 

The infrared thermometer optris LS supports the professional noncontact temperature measurement of objects as small as 1 mm in a temperature range between -35°C and +900°C.

This thermometer can be used in characteristic applications like preventive maintenance, quality management, research and development and electronic design.

The crosshair laser sighting indicates the spot size at any distance with absolute accuracy.

 

OPTRIS CT – Non contact temperature measurement -40C to + 900C:

optris_ct[1]

One of the smallest infrared sensors world-wide with 22:1 optical resolution Rugged and usable up to 180°C ambient temperature without cooling Separate electronics with easily accessible programming keys and LCD backlit display Optional analogue output: 0/4-20 mA, 0-10 V, thermocouple type K or J Optional USB, RS485, RS232 interface or two relay outputs (optically isolated) Installation of up to 32 sensing heads in a network (with RS485)

 

 

 

OPTRIS CS – Low cost infra red thermometer -20C to + 350C:

optris-cs[1]

Size: M12x1, 87 mm long, stainless steel housing Temperature range: -20 to 350°C. Usable up to 75°C ambient temperature without cooling Scalable analog output: 0 – 10 V or 0 – 5 V Short circuit and polarity reversal protection Optional USB programming interface and software Wide power range: 5 – 7, 12 – 28 V DC

 

 

 

 

OPTRIS CS-Micro – Low Cost Micro Size Infra Red Thermometer:

optris-cs-micro[1]

 

 

 

 

 

 

 

 

Size: M12x1, 28 mm long, stainless steel housing. Temperature range: -20 to 350°C Operates in ambient temperature up to 120°C without cooling (sensing head) Scalable analog output: 0 – 10 V or 0 – 5 V and additional simultaneous alarm output Short circuit and reverse polarity protection Optional USB programming interface and software Wide power range: 5 – 7, 12 – 28 V DC